SPECTRE HPA electropneumatic engine

PIXIE is an affordable, double solenoid electropneumatic HPA engine made for the airsoft world.

Using the same head system (SRC) as SPECTRE Mk3, you can use any AEG nozzle with your PIXIE engine.

It increases nozzle's stability, creates a smoother movement, and enhances compatibility with difefrent buckings and hopup units.

The nozzle is actuated by an industrial solenoid similar to the SERAPH solenoids.

The poppet is replaced by a direct-acting solenoid valve, sharing the same parts as our electromagnetic HPA engine, SPECTRE.

Replacing the poppet by a direct-acting valve reduces costs and enhance reliability of the engine.

PERFORMANCES AND TECHNICAL DATA

Battery: 7,4V (2S) or 11,1V (3S) LiPo battery

Operating pressure: 4-10 bars (60-145psi)

Max operating pressure: 10 bars (145psi)

Rate of fire: 20 RPS with most replicas, plug-ang-play

Up to 30RPS (with 11.1V battery and some tweaking, requires technical skills)

Firing mode: Semi, Full, Burst 2/3/4/5, Binary

Energy output (with 0.20g BBs):

Typically 0.95J at 80psi with 250mm 6.03 barrel / 1.15J at 80psi with 365mm 6.05 barrel

Air Efficiency: around 3,000shots @1,0J with a 0.8L 200bars tank (48ci 3000psi)

Test setup: 0.28g BB - 285mm 6.03 barrel - Maxx Model Hopup Unit (set to zero) - Maple Leaf Macaron 70

Electric Efficiency: up to 10,000 shots with an 250mAh 30C 7,4V battery

Typical poppet dwell time: 2-8 milliseconds

Typical nozzle dwell time: 15-25 milliseconds

FUNCTIONNALITIES

PROGRAMMING

Programming made easier thanks to a 128x32 OLED external display with two buttons.

CHIMERA MADE FROM SPECTRE AND SERAPH

Low maintenance: only the nozzle requires lubrication.

Only three dynamic O-rings are used in PIXIE. They are all located on the nozzle.

Unscrew the cylinder head, grease the nozzle or replace the O-rings, and the engine is ready for the next 10,000 shots.

EXTREME MODULARITY

Uses AEG nozzles, no proprietary nozzles. You can put PIXIE in every airsoft replica with a "straight nozzle".

For airsoft replicas with an offset nozzle, we already offer offset head for Cyma SVD and P90 gearboxes.

(Note: you sitll need the according AEG nozzle with these kits).

If you are interested in seeing more offset replicas compatible with PIXIE, contact us!

Any questions? Ask us anything here.